Home | AraucoPly | Products | Certifications | Technical Information | Catalogs | Contact | Other Countries
 

 

  Technical Information

 



  Structural and Dimensional Properties







  Span Rating
 

 
Note: The allowable spans were determined using a dead load of 10 psf. If the dead load exceeds 10 psf then the live load shall be reduced accordingly.  To consider this data, panels shall be a minimum of 24 inches (600mm.) wide.
  • 11/32” (9mm) and 15/32” (12mm) span rated siding products available with plain (no groove) or shallow groove patterns only.
  • 19/32” (15mm) siding wall span ratings apply to panels with the following surface treatments: Plain (no groove), 4”OC / 8”OC shallow groove and 4”OC / 8”OC deep groove patterns only.




Adhesive
All ARAUCOPLY® panels are pressed with exterior (WBP, Water Boil Proof) phenolic glue, which is compliant with all the quality regulations of ARAUCOPLY product certification standards. Formaldehyde emissions are 0.02 mg/L, which fulfill the requirements of emission class E1 according to European standard EN 717-1 and emission class Super E0 according to Australian standard AS/NZS 2098.11. In addition, our panels are exempt from CARB (California Air Resources Board) formaldehyde emission reduction regulations.


Safety Data Sheet (Download PDF)

Siding Installation / Warranty (Download PDF)



   
 
| Contact | Site Map